Below method statement covers installation and connection of all interior and exterior lighting, lighting control devices and wiring devices according to the approved shop drawings, project specifications and other related codes. One of the purpose of this method statement is to coordinate the exact location and position of all lighting fixtures, switches, outlet boxes and… Read More »
Before start of the installation works exact locations of luminaries will be checked and it should be as per approved RCP (reflected ceiling plan) drawing. Installation shall be carried out by skilled and suitably experienced electricians under supervision of highly competent site supervisors and engineers to ensure the correctness and best quality of installation. Light… Read More »
The lighting system installation work shall cover the supply and installation of lighting system equipment such as Main lighting distribution boards (MLDBs), lighting distribution boards (LDBs), receptacles, light control switches, ceiling fans, lighting wires, conduits, junction boxes, lighting poles, towers, etc. Lighting company shall carry out the installation of various lighting equipment as indicated in… Read More »
Electrical wiring generally refers to insulated conductor used to carry current including the associated devices. Domestic electric appliances like lights, fans, washing machines, water pumps etc are connected to the supply through insulated wires which are controlled by switches. The wiring diagram gives the connections of different appliances to the supply within a house or… Read More »
You can find below Emergency Lighting System Installation Method Statement in steps that covers the pre-installation steps and after that installation procedure. Pre-installation checks for Emergency Lighting System Ensure the materials, equipment and components are as per approved material submittal and as per technical specification. Ensure that the drawings are current and marked “Issued for… Read More »
Below is a precise electrical installation method statement that covers installation of main distribution board and MCC panel board in compliance with the approved design, drawings, manufacturer instructions and material submittals. The electrical or MEP project manager is overall responsible for the implementation of this procedure and any relevant documents/standards. Site Engineer will be responsible… Read More »