Resources For Electrical & Electronic Engineers
If you are looking for power distribution system then you have come to the right place. For more details visit us, we’re here to help you.
In general understanding electrical distribution transformers are used to reduce primary system voltages (which is normally 2.4-34.5kV) to the level of utilization voltages i.e. 120- 600V. International electrotechnical commission standards do not distinguish between distribution electrical transformers and power transformer. They are
It is well known that Circuit Breakers are devices which are used to break a circuit continuity and restore it again when required. Normally these are known as switching devices that can be activated manually or automatically to control the electrical power
Below is a precise electrical installation method statement that covers installation of main distribution board and MCC panel board in compliance with the approved design, drawings, manufacturer instructions and material submittals. The electrical or MEP project manager is overall responsible for the
The purpose of this procedure is to ensure that all works regarding electrical junction box and supports installation for electrical instrumentation works shall be done in accordance with the applicable local standards and all other applicable international codes and standards. Scope of
Prior to commencement of work, all shop drawings will be submitted for approval by consultant/client. Shop drawings will show the layout of pipe and cables as well as the section drawings. Only approved shop drawing will be used for installation. All materials
The electrical energy is almost exclusively generated, transmitted and distributed in the form of alternating current. Therefore, the question of power factor immediately comes into picture. Most of the loads (e.g. induction motors, arc lamps) are inductive in nature and hence have