Resources For Electrical & Electronic Engineers
What are the types of line distortions? The distortions occurring in the transmission line are called waveform distortion or line distortion. Waveform distortion is of two types i.e. frequency distortion and phase or delay distortion. How frequency distortion occurs in a power transmission
The parameters of a transmission line are Resistance (R), Inductance (L), Capacitance (C) and Conductance (G). Resistance (R) is defined as the loop resistance per unit length of the wire. Its unit is ohm/Km. Inductance (L) is defined as the loop inductance per unit length of
Cable Management is a key component of Data Center and Network Management. It refers to an important step during the installation of building services (ie electrical services) and the subsequent installation of equipment providing means to efficiently secure electrical, data, and other cables
Cable tray system shall be used for laying of MV and LV power, control, instrumentation and special cables in the Power Plant. Cable trays shall be supported on cantilever brackets at specified interval. The trays shall be strong enough to keep the deflection
This method statement details general electrical installation procedure that is useful for construction of electrical work for houses or any other building projects. Electrical engineer can understand basic requirements and how to arrange the sequence of electrical work. Project Manager shall be
Electrical switchgear are very important part of any electrical distribution system. Switch gears are used for many purposes like protection, isolation from live parts and switching operation. A switchgear is the combination of electrical disconnect switches, fuses or circuit breakers used to