Resources For Electrical & Electronic Engineers
Being an electrical engineer on a construction project is a very tedious and responsible job. Electrical site engineer is wholly responsible for the ordering of materials as per the pre approved material submittals and an electrical project specifications. Here in this article
All electrical checks and tests shall be conducted as per the manufacturer’s drawings/manuals, relevant codes of installation and below given commissioning check lists. The electrical installer/contractor shall also carry out additional tests if called for in the project electrical specifications. Contractor shall
This document covers the livening up and isolation of electrical supplies from the incoming power supply to the final circuit. The aim is to have a safe procedure for the livening up electrical supplies during the commissioning period and a safe procedure
You can find below a comprehensive switchgear testing and commissioning procedure. If you need to learn and understand the switchgear testing and commissioning procedure then this article is enough. But if you want to submit to client/consultant the method statement for switchgear
As a standard practice installer or contractor shall arrange for the witnessing of the following tests on the fully equipped switchboards (main, submain distribution boards and Motor Control Centers MCC) including primary bus bars and connections at the factory, in accordance with