CIRCUTOR S.A. thanks you for choosing one of the regulators from the Computer Smart series. These units have been built with state-of-the-art technologies, including a powerful processor that can calculate the optimum algorithms and achieve the best correction of the cos φ. The units comply with the EN 61010 Electrical Safety Standard, in accordance with… Read More »
As a standard practice installer or contractor shall arrange for the witnessing of the following tests on the fully equipped switchboards (main, submain distribution boards and Motor Control Centers MCC) including primary bus bars and connections at the factory, in accordance with IEC 439-1: High voltage power frequency tests on main and auxiliary circuits Dielectric/insulation… Read More »
Before starting the switchgear testing an approved testing & commissioning engineer should be appointed in order to thoroughly review all the applicable drawings and specification, and to become totally familiar with all systems and the design intent. Experience certificate of T&C engineer to be submitted for client approval and test and commissioning should be done under… Read More »
A circuit breaker is a mechanical switching device, capable of making, carrying and breaking currents under normal circuit conditions. It is also capable of making and carrying currents for a specified time and breaking currents under specified abnormal circuit conditions, such as those of a short circuit. Air Blast Circuit Breaker is one of major component… Read More »
A tap changer is a device fitted to power transformers for regulation of the output voltage to required levels. On-load tap-changers (OLTCs) are indispensable in regulating power transformers used in electrical energy networks and industrial applications. OLTC changer alters the turn ratios of the transformer on the system by altering the number of turns in… Read More »
Most transformer companies offer standard engineered products only, and ask the users to make it fit their applications. Also these companies can engineer the product both electrically and mechanically to fit virtually any application. Typically companies employ three winding styles for Special Design Dry Type transformers, based on kVA, voltage and BIL requirements. The ability to… Read More »