Cable Management is a key component of Data Center and Network Management. It refers to an important step during the installation of building services (ie electrical services) and the subsequent installation of equipment providing means to efficiently secure electrical, data, and other cables including the power distribution system. Properly arranged cables increase problem resolution time dramatically.… Read More »
Cable tray system shall be used for laying of MV and LV power, control, instrumentation and special cables in the Power Plant. Cable trays shall be supported on cantilever brackets at specified interval. The trays shall be strong enough to keep the deflection of the fully loaded tray within permissible limits. In general, cable trays run in… Read More »
This method statement details general electrical installation procedure that is useful for construction of electrical work for houses or any other building projects. Electrical engineer can understand basic requirements and how to arrange the sequence of electrical work. Project Manager shall be responsible for the implementation of this procedure for electrical work and co-ordinate with the… Read More »
Electrical switchgear are very important part of any electrical distribution system. Switch gears are used for many purposes like protection, isolation from live parts and switching operation. A switchgear is the combination of electrical disconnect switches, fuses or circuit breakers used to control, protect and isolate electrical equipment. Switchgear is used both to de-energize equipment… Read More »
What is voltage stabilizer? Voltage stabilizer is an equipment that stabilizes voltage. The process of stabilization happens by bringing voltage to a desirable level whenever there is any kind of fluctuation in the power system. Therefore we can say that voltage stabilizer is a current regulator used to maintain and control voltage to produce a… Read More »
Differential busbar protection is the most common and reliable scheme for the bus bar protection. Earlier there was no other option to use only conventional over current relays for busbar protection. But it is desirable that fault in any feeder or transformer connected to the busbar system should not disturb overall busbar system. Due to… Read More »